How to Descale an Espresso Machine (and How Often)
Steam & Shot is reader-supported. If you buy through links on this site, we may earn a commission at no extra cost to you. Learn more.
Descaling is the least exciting part of owning an espresso machine, and one of the most important. Mineral buildup slowly clogs your machine, affects temperature and can eventually cause expensive damage. The good news: it usually takes less than an hour every month or two.
What is scale?
Tap water contains dissolved minerals, mostly calcium and magnesium. When water is heated, some of those minerals come out of the water and stick to the inside of the boiler or thermoblock, pipes and valves as a chalky deposit called scale. Over time, scale can:
- Slow or block the flow of water and steam
- Make brewing temperature less stable
- Reduce steam power
- Damage heating elements and valves
How often should you descale?
It depends on how hard your water is and how much you use your machine. Many manufacturers recommend descaling every one to three months, and some machines show an alert when it’s time. Your machine’s manual is the best guide, because some machines have specific schedules or descaling programs.
As a rough rule:
- Hard water or daily use: about once a month
- Average water: every two to three months
- Soft or filtered water: less often, as your manual allows
Choose the right descaler
- Use the descaler your manufacturer recommends, or a descaling product made for espresso machines. Most are based on citric or lactic acid and are designed to be gentle on internal parts.
- Avoid vinegar unless your manual says it’s okay. Many manufacturers advise against it because it can be harsh on seals and parts, and the smell and taste can be hard to rinse out.
- Never mix cleaning products, and follow the dilution on the label.
Using an unapproved product can, in some cases, affect your warranty, so check before you buy.
How to descale an espresso machine: step by step
Every machine is a little different, so follow your manual if it gives specific steps or has a built-in descaling mode. Here’s the general process for most home machines:
- Empty and rinse the water tank. Remove any water filter, since filters shouldn’t be exposed to descaler.
- Mix the descaling solution in the tank according to the product’s instructions.
- Remove the portafilter and empty the drip tray. Place a large container under the group head and another under the steam wand.
- Start the descaling program, if your machine has one. If not, run about half of the solution through the group head and steam wand in short bursts.
- Let the solution sit for 10 to 20 minutes so it can dissolve the scale.
- Run the rest of the solution through the group head and steam wand.
- Rinse thoroughly. Empty and rinse the tank, fill it with fresh water and run at least one full tank through the group head and steam wand. Repeat if you can still smell or taste the descaler.
- Reinstall your water filter and pull a test shot to season the machine before you drink anything.
Water tips that reduce scale
- Use filtered water. A pitcher filter or your machine’s own filter reduces the minerals that cause scale.
- Don’t use pure distilled water unless your manual allows it. Some machines rely on minerals in the water for their sensors, and very soft water can make coffee taste flat.
- Refresh the tank regularly. Fresh water tastes better and keeps the tank cleaner.
Signs your machine needs descaling
- Water flows more slowly from the group head or steam wand
- Weaker steam pressure
- Shots taste different even though nothing else changed
- White, chalky residue around the group head or in the tank
- A descaling alert on the machine
Descaling vs cleaning
Descaling removes minerals from inside the machine. Cleaning removes coffee oils and milk residue from the parts you touch every day. You need both. See our guide on how to clean an espresso machine for a simple daily, weekly and monthly routine.
Frequently asked questions
Can I descale with citric acid?
Many commercial descalers are citric acid based, but strength matters. Use a product made for espresso machines or follow your manufacturer’s instructions rather than guessing at a homemade mix.
How long does descaling take?
Usually 20 to 45 minutes, including rinsing. Machines with a built-in program may guide you through each step.
What happens if I never descale?
Scale builds up gradually until it restricts water flow, affects temperature and can damage the heating system. Repairs cost far more than descaler.
